How difficult is it to install
your Headlight Covers?
The easiest way to answer this questions is for you to watch our
installation video at the bottom of this page. Installing precut
headlight cover film kits can be significantly easier and less time
consuming than installing film by the roll, it can still be a difficult
> Installation difficulty depends on the
ability of the installer.
> If the headlight has complex curves, protrusions or is compounded.
> If the proper installation tools and fluids are used.
> If the installer is familiar with heat stretching film.
What is the difference
between Tint, Protection and Blackout Headlight Covers?
Tint, Protection and Blackout headlight covers are both designed
to change the color of the lens, without greatly changing the
> Tint & Blackout covers are for aesthetics or "looks" only. No
protection is provided.
> Protection film protects your lights from small road debris, UV damage,
sand and weather.
> Tint & Blackout film is 3 mil (.0042") thick and protection film is 15
mil or (.021") thick.
> Protection film is five times thicker and more difficult to apply, heat
> Tint and Protection covers are adhesive backed, Blackout covers are
> Tint and Protection headlight covers can be removed, but can not be
> Blackout headlight covers can be removed and reapplied any time.
What Headlight Cover application
tools do you recommend?
All of them. Installation can be difficult and the tools we sell
help guarantee results.
> The application squeegee will reduce
air bubbles and aide in heat conforming the light.
> Low friction sleeves prevent "squeegee scratches."
Rapid Prep removes any dirt or debris from your lights prior to
> Rapid Tac
will aide in the wet application of our tint and protection headlight
> Rapid Clear will
act as a finishing agent and polish on all headlight covers.
> Seal-It Pens are used to seal the edges of all our headlight covers,
How much does it cost to have my
headlight covers professionally installed?
The cost of tinted headlight covers depends on the film being used and the vehicle being
applied to. In general, the cost is $120 - $150 for headlight
and even greater for protection film installation.
Note: If you are purchasing this kit and plan on
having a professional installer apply the tint, you will generally not
save money. Installers profit is derived from the labor, not the
film costs and it is in their best interest to have as many billable
labor hours as possible. These kits are designed for the do-it-yourself
minded individual, if you plan on having this kit installed
professionally we recommend you purchase their film and installation
Do you offer a warranty?
We offer a limited warranty of 3 years. When installed by the DIY
individual we warranty that the headlight cover will not fade, turn
purple or change color. When professionally installed we guarantee
that the cover to not fade, peel, crack, bubble or turn purple when
installed by a licensed professional.
What is the legal headlight cover shade for my state?
Clear and Clear Protection films are legal.
Colored or tinted headlight covers may not be legal for street use on primary lighting.
Please check your state or local laws before application. All non-clear
are intended for off-road show car use only.